Showing 61–80 of 187 results
CONTACT CLEANER PLUS
Plastic safe: Yes
Cleaning, de-oxidation, lubrication and protection of electrical contacts. Safe on plastic and rubber. CRC Contact Cleaner Plus provides long lasting lubrication which is safe to use on all metal surfaces, most rubbers, plastics and coatings. Contact Cleaner Plus is non corrosive. It also has a no ozone depleting action.
Paste with copper particles for heavy loads at start-up situations.Also acts as anti-seize.
Solvent cleaner to prepare the surface for examination.A fast drying cleaner for the removal of all kinds of contaminants on the surface to be inspected.
PTFE lubricant for dry lubrication and use on plastic friction points.
CRC Dry Lube-F
PTFE lubricant for dry lubrication and use in food processing areas.
Grease and oil-free lubricant for the lubrication of plastic, rubber or metal surfaces. Clean, dry and not sticky. Temperature resistance up to +250C. As a lubricant, CRC Dry Lube-F is most effective where low speeds and light loads are involved. Recommended for use as a lubricant in food processing areas where incidental food contact may occur.
High pressure resistant, dry MoS2 film for metal-to-metal lubrication where a wet film cannot be tolerated.
Efficient high pressure liquid gas blend that removes dust and cleans with a powerful jet of dry inert gas.
Non-flammable, slow drying water based cleaner for heavy contaminants in food processing areas.
For heavy contaminants
Non-flammable, slow drying water based cleaner for heavy contaminants in food processing areas. A concentrated, water based degreaser for use in the food industry; NSF A1 registered. Excellent product for use in dip tanks, pressure washer, ultrasonic and steam cleaning equipment. Dilute according to information on the datasheet. Safe on plastics. Rinse with water after application. Readily biodegradable concentrate according to OECD 301B: 64%.
A biodegradable penetrating oil. Lubricates and frees seized and rusted metal parts (bolts, screws,…). Facilitates dismantling.
Bearing grease with PTFE for food processing equipment. -50C to +165C. Provides long-term lubrication with extreme pressure resistance.
Fast drying solvent cleaner for heavy contaminants on mechanical parts, suitable for most plastics.
FAST DRY DEGREASER
Plastic safe: Average
Fast drying solvent cleaner for heavy contaminants on mechanical parts, suitable for most plastics. A very fast drying cleaner with a low flash point, which dissolves grease, oil, lubricants and removes contaminants attached to the surface. Designed for applications where flammable solvents can be used. Test before application on sensitive plastics (e.g. EPS, XPS, ABS) or whenever stress cracking of the plastics can be a problem. When using on large surfaces, ensure adequate ventilation.
Cleans painted and bare metal surfaces contaminated with rust, lime, algae, oils and tar.
Protective, final coating with a shiny aluminum aspect. A single component Zinc-Aluminum coating.
Touch-up paint for hot galvanised pieces. Protective coating with an exceptional gloss.
Heavy-duty Lubricant. CRC Gear and Wire Rope Lube is formulated to provide protection and lubrication under all operating conditions.
Assembly paste with solid graphite particles and MoS2 for easy assembly and smooth start-up situations.
End of content
End of content
