CRC 3-36
Price on RequestLight lubricating oil, good penetration for general use. A universal lubricating oil with excellent penetrating properties.
Showing 1–20 of 24 results
Multifunctional service fluid for use in the professional mechanical maintenance.
Paste with copper particles for heavy loads at start-up situations.Also acts as anti-seize.
PTFE lubricant for dry lubrication and use on plastic friction points.
High pressure resistant, dry MoS2 film for metal-to-metal lubrication where a wet film cannot be tolerated.
Non-flammable, slow drying water based cleaner for heavy contaminants in food processing areas.
For heavy contaminants
Non-flammable, slow drying water based cleaner for heavy contaminants in food processing areas. A concentrated, water based degreaser for use in the food industry; NSF A1 registered. Excellent product for use in dip tanks, pressure washer, ultrasonic and steam cleaning equipment. Dilute according to information on the datasheet. Safe on plastics. Rinse with water after application. Readily biodegradable concentrate according to OECD 301B: 64%.
A biodegradable penetrating oil. Lubricates and frees seized and rusted metal parts (bolts, screws,…). Facilitates dismantling.
Fast drying solvent cleaner for heavy contaminants on mechanical parts, suitable for most plastics.
FAST DRY DEGREASER
Plastic safe: Average
Fast drying solvent cleaner for heavy contaminants on mechanical parts, suitable for most plastics. A very fast drying cleaner with a low flash point, which dissolves grease, oil, lubricants and removes contaminants attached to the surface. Designed for applications where flammable solvents can be used. Test before application on sensitive plastics (e.g. EPS, XPS, ABS) or whenever stress cracking of the plastics can be a problem. When using on large surfaces, ensure adequate ventilation.
Heavy-duty Lubricant. CRC Gear and Wire Rope Lube is formulated to provide protection and lubrication under all operating conditions.
Assembly paste with solid graphite particles and MoS2 for easy assembly and smooth start-up situations.
Highly concentrated alkaline degreaser. Highly concentrated water based detergent degreaser.
CRC HEAVY DUTY DEGREASER
Highly concentrated alkaline degreaser. Highly concentrated water based detergent degreaser. Quickly removes oil, grease, silicones and heavy grime. Safe for use on most plastics, painted and enamelled surfaces.
Directions:
Can be used cold or hot. Apply as a concentrate or diluted (1: 6 to 1: 40) dependent upon the level of soiling.
Synthetic lithium complex grease for very high speed applications, even at low temperatures. Designed for applications with a high speed factor.
Lithium EP grease for low speed, high load applications with exposure to high temperatures. Recommended on bearings of electric motors.
Water based, foaming cleaner for degreasing and cleaning shiny metal surfaces. CRC Inox Kleen is NSF A7,C1 registered for use in the food industry.
PAO bearing grease for high performance at ultra low temperatures. Exeptional low running torque.
Ceramic paste for heavy loads and high temperatures during start-up conditions.
Lithium EP grease for general purpose. For use on all common rotative bearings.
PAINT & GASKET REMOVER
Removes paint and gaskets
Non chlorinated solvent to remove gaskets, glues and baked-on carbon deposits from all kind of hard substrates. None chlorinated solvents. Safe to use on all metal surfaces, does not stain. Quickly and easily dissolves paints and graffiti. Suitable for use throughout the industry.
Rust loosener with freeze shock effect. When sprayed onto a rusted nut bolt connection.
Synthetic lubricating oil, suitable for plastic drives and applications at high temperatures.
End of content
End of content